Is it possible to switch between Xentry XDOS and Xentry Passthru?
Can I change my Xentry XDOS configured to MB SD Connect C4
to use with Autel J2534
Passthru?
Here's the clue.
Mercedes Benz made different installers for open shell and passthru.
But XDOS has some intermediate files inside anyway.
Easy XDOS-XPT change in registry.
You can change DAI_APPTYPE from XDOS to XPT, EURO5, XD4NFZ, XDPAD, XDPAD2, 2 locations in the registry.
Remember to change cal.ini.
Here is @Magic SFX- Achieve Switch (exe) which one of the clients uses to switch between XDOS and PASSTHRU in seconds.
( Only works if Mercedes Benz\Xentry\bin is located in c:\Program Files(86) )
His Open SFX you can see what he did and do for your version.
DAI application switch (https://mega.nz/file/O2QHXbpQ#KRNrbOxD8ewO0Kh_zLkEX1xjyf9MN FXx2lLGXtylww)
Including SDConnect switch and Passthru switch.
Here's an example. You will find another switch on google as well.
Tested on w213 w117 w205 w211 w447 etc with no problems.
If some models have problems... they all seemed to be models on the border of DAS and Xentry models... cease swapping solved the problem.
How to make:
exchange of cease
You need to change caesar drivers as xdos uses v3.3.5.1 and xpt uses 3.3.6.2.
When ceasar version is not changed, xdos in passthru mode does not connect with w204, w212 and other models of the same generation.
Take the caesar64 folder and the comdat/driver folder from xpt and make a small program that can swap the 2 versions at will (simple folder renaming script) and then you will have full access both in the car and in the truck.
The full path is programdata/mercedes-benz/config/comdat/caesar/driver
Credit to Magic, benjaminjai from MHHAUTO.
You are at your own risk.
Comments