![](https://static.wixstatic.com/media/e2ec77_20b72e20bbd54c43be543eede85fbdf1~mv2.png/v1/fill/w_980,h_980,al_c,q_90,usm_0.66_1.00_0.01,enc_auto/e2ec77_20b72e20bbd54c43be543eede85fbdf1~mv2.png)
If the #pcmtuner dongle is hot, it is normal because it is LED.
* New #dongle manufactured after June 8, 2022 removed chip before delivery.
Follow the instructions below:
To remove the chip, apply some solder oil to the chip.
![](https://static.wixstatic.com/media/e2ec77_2373c82657254540b8ba696c29503d41~mv2.jpg/v1/fill/w_563,h_637,al_c,q_80,enc_auto/e2ec77_2373c82657254540b8ba696c29503d41~mv2.jpg)
280 degrees hot air
![](https://static.wixstatic.com/media/e2ec77_4659021ba5104370aca6a0c35fa222a5~mv2.jpg/v1/fill/w_560,h_600,al_c,q_80,enc_auto/e2ec77_4659021ba5104370aca6a0c35fa222a5~mv2.jpg)
use your hot air
![](https://static.wixstatic.com/media/e2ec77_9bc9d27e4aa0488bb8d4055529267074~mv2.jpg/v1/fill/w_564,h_642,al_c,q_85,enc_auto/e2ec77_9bc9d27e4aa0488bb8d4055529267074~mv2.jpg)
Blow about 40s-1min until you can remove the chips.
![](https://static.wixstatic.com/media/e2ec77_853426a8e7db474db2a773b447709ff6~mv2.jpg/v1/fill/w_557,h_640,al_c,q_80,enc_auto/e2ec77_853426a8e7db474db2a773b447709ff6~mv2.jpg)
![](https://static.wixstatic.com/media/e2ec77_0dabddf6c5f54260ac8760b93ff6fbda~mv2.jpg/v1/fill/w_557,h_643,al_c,q_80,enc_auto/e2ec77_0dabddf6c5f54260ac8760b93ff6fbda~mv2.jpg)
![](https://static.wixstatic.com/media/e2ec77_b5f0f5dd8a1c45d2b2a3a5f1649f97ef~mv2.jpg/v1/fill/w_561,h_626,al_c,q_80,enc_auto/e2ec77_b5f0f5dd8a1c45d2b2a3a5f1649f97ef~mv2.jpg)
check the computer after everything is done.
The same procedure goes for the green #dongle
Comments